Closed
Conversation
Signed-off-by: sgaud-quic <sgaud@qti.qualcomm.com>
shashim-quic
pushed a commit
that referenced
this pull request
Jun 16, 2025
…stamping The stmmac platform drivers that do not open-code the clk_ptp_rate value after having retrieved the default one from the device-tree can end up with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will eventually propagate up to PTP initialization when bringing up the interface, leading to a divide by 0: Division by zero in kernel. CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22 Hardware name: STM32 (Device Tree Support) Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x6c/0x8c dump_stack_lvl from Ldiv0_64+0x8/0x18 Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4 stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c stmmac_hw_setup from __stmmac_open+0x18c/0x434 __stmmac_open from stmmac_open+0x3c/0xbc stmmac_open from __dev_open+0xf4/0x1ac __dev_open from __dev_change_flags+0x1cc/0x224 __dev_change_flags from dev_change_flags+0x24/0x60 dev_change_flags from ip_auto_config+0x2e8/0x11a0 ip_auto_config from do_one_initcall+0x84/0x33c do_one_initcall from kernel_init_freeable+0x1b8/0x214 kernel_init_freeable from kernel_init+0x24/0x140 kernel_init from ret_from_fork+0x14/0x28 Exception stack(0xe0815fb0 to 0xe0815ff8) Prevent this division by 0 by adding an explicit check and error log about the actual issue. While at it, remove the same check from stmmac_ptp_register, which then becomes duplicate Fixes: 19d857c ("stmmac: Fix calculations for ptp counters when clock input = 50Mhz.") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-1-d73340a794d5@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sgaud-quic
pushed a commit
that referenced
this pull request
Sep 29, 2025
When the PAGEMAP_SCAN ioctl is invoked with vec_len = 0 reaches pagemap_scan_backout_range(), kernel panics with null-ptr-deref: [ 44.936808] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 44.937797] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 44.938391] CPU: 1 UID: 0 PID: 2480 Comm: reproducer Not tainted 6.17.0-rc6 #22 PREEMPT(none) [ 44.939062] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 44.939935] RIP: 0010:pagemap_scan_thp_entry.isra.0+0x741/0xa80 <snip registers, unreliable trace> [ 44.946828] Call Trace: [ 44.947030] <TASK> [ 44.949219] pagemap_scan_pmd_entry+0xec/0xfa0 [ 44.952593] walk_pmd_range.isra.0+0x302/0x910 [ 44.954069] walk_pud_range.isra.0+0x419/0x790 [ 44.954427] walk_p4d_range+0x41e/0x620 [ 44.954743] walk_pgd_range+0x31e/0x630 [ 44.955057] __walk_page_range+0x160/0x670 [ 44.956883] walk_page_range_mm+0x408/0x980 [ 44.958677] walk_page_range+0x66/0x90 [ 44.958984] do_pagemap_scan+0x28d/0x9c0 [ 44.961833] do_pagemap_cmd+0x59/0x80 [ 44.962484] __x64_sys_ioctl+0x18d/0x210 [ 44.962804] do_syscall_64+0x5b/0x290 [ 44.963111] entry_SYSCALL_64_after_hwframe+0x76/0x7e vec_len = 0 in pagemap_scan_init_bounce_buffer() means no buffers are allocated and p->vec_buf remains set to NULL. This breaks an assumption made later in pagemap_scan_backout_range(), that page_region is always allocated for p->vec_buf_index. Fix it by explicitly checking p->vec_buf for NULL before dereferencing. Other sites that might run into same deref-issue are already (directly or transitively) protected by checking p->vec_buf. Note: From PAGEMAP_SCAN man page, it seems vec_len = 0 is valid when no output is requested and it's only the side effects caller is interested in, hence it passes check in pagemap_scan_get_args(). This issue was found by syzkaller. Link: https://lkml.kernel.org/r/20250922082206.6889-1-acsjakub@amazon.de Fixes: 52526ca ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs") Signed-off-by: Jakub Acs <acsjakub@amazon.de> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jinjiang Tu <tujinjiang@huawei.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Penglei Jiang <superman.xpt@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
sgaud-quic
pushed a commit
that referenced
this pull request
Oct 28, 2025
Calling intotify_show_fdinfo() on fd watching an overlayfs inode, while
the overlayfs is being unmounted, can lead to dereferencing NULL ptr.
This issue was found by syzkaller.
Race Condition Diagram:
Thread 1 Thread 2
-------- --------
generic_shutdown_super()
shrink_dcache_for_umount
sb->s_root = NULL
|
| vfs_read()
| inotify_fdinfo()
| * inode get from mark *
| show_mark_fhandle(m, inode)
| exportfs_encode_fid(inode, ..)
| ovl_encode_fh(inode, ..)
| ovl_check_encode_origin(inode)
| * deref i_sb->s_root *
|
|
v
fsnotify_sb_delete(sb)
Which then leads to:
[ 32.133461] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 32.134438] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 32.135032] CPU: 1 UID: 0 PID: 4468 Comm: systemd-coredum Not tainted 6.17.0-rc6 #22 PREEMPT(none)
<snip registers, unreliable trace>
[ 32.143353] Call Trace:
[ 32.143732] ovl_encode_fh+0xd5/0x170
[ 32.144031] exportfs_encode_inode_fh+0x12f/0x300
[ 32.144425] show_mark_fhandle+0xbe/0x1f0
[ 32.145805] inotify_fdinfo+0x226/0x2d0
[ 32.146442] inotify_show_fdinfo+0x1c5/0x350
[ 32.147168] seq_show+0x530/0x6f0
[ 32.147449] seq_read_iter+0x503/0x12a0
[ 32.148419] seq_read+0x31f/0x410
[ 32.150714] vfs_read+0x1f0/0x9e0
[ 32.152297] ksys_read+0x125/0x240
IOW ovl_check_encode_origin derefs inode->i_sb->s_root, after it was set
to NULL in the unmount path.
Fix it by protecting calling exportfs_encode_fid() from
show_mark_fhandle() with s_umount lock.
This form of fix was suggested by Amir in [1].
[1]: https://lore.kernel.org/all/CAOQ4uxhbDwhb+2Brs1UdkoF0a3NSdBAOQPNfEHjahrgoKJpLEw@mail.gmail.com/
Fixes: c45beeb ("ovl: support encoding fid from inode with no alias")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-unionfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
sgaud-quic
pushed a commit
that referenced
this pull request
Nov 17, 2025
Typically copynotify stateid is freed either when parent's stateid is being close/freed or in nfsd4_laundromat if the stateid hasn't been used in a lease period. However, in case when the server got an OPEN (which created a parent stateid), followed by a COPY_NOTIFY using that stateid, followed by a client reboot. New client instance while doing CREATE_SESSION would force expire previous state of this client. It leads to the open state being freed thru release_openowner-> nfs4_free_ol_stateid() and it finds that it still has copynotify stateid associated with it. We currently print a warning and is triggerred WARNING: CPU: 1 PID: 8858 at fs/nfsd/nfs4state.c:1550 nfs4_free_ol_stateid+0xb0/0x100 [nfsd] This patch, instead, frees the associated copynotify stateid here. If the parent stateid is freed (without freeing the copynotify stateids associated with it), it leads to the list corruption when laundromat ends up freeing the copynotify state later. [ 1626.839430] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 1626.842828] Modules linked in: nfnetlink_queue nfnetlink_log bluetooth cfg80211 rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd nfs_acl lockd grace nfs_localio ext4 crc16 mbcache jbd2 overlay uinput snd_seq_dummy snd_hrtimer qrtr rfkill vfat fat uvcvideo snd_hda_codec_generic videobuf2_vmalloc videobuf2_memops snd_hda_intel uvc snd_intel_dspcfg videobuf2_v4l2 videobuf2_common snd_hda_codec snd_hda_core videodev snd_hwdep snd_seq mc snd_seq_device snd_pcm snd_timer snd soundcore sg loop auth_rpcgss vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs 8021q garp stp llc mrp nvme ghash_ce e1000e nvme_core sr_mod nvme_keyring nvme_auth cdrom vmwgfx drm_ttm_helper ttm sunrpc dm_mirror dm_region_hash dm_log iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse dm_multipath dm_mod nfnetlink [ 1626.855594] CPU: 2 UID: 0 PID: 199 Comm: kworker/u24:33 Kdump: loaded Tainted: G B W 6.17.0-rc7+ #22 PREEMPT(voluntary) [ 1626.857075] Tainted: [B]=BAD_PAGE, [W]=WARN [ 1626.857573] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024 [ 1626.858724] Workqueue: nfsd4 laundromat_main [nfsd] [ 1626.859304] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1626.860010] pc : __list_del_entry_valid_or_report+0x148/0x200 [ 1626.860601] lr : __list_del_entry_valid_or_report+0x148/0x200 [ 1626.861182] sp : ffff8000881d7a40 [ 1626.861521] x29: ffff8000881d7a40 x28: 0000000000000018 x27: ffff0000c2a98200 [ 1626.862260] x26: 0000000000000600 x25: 0000000000000000 x24: ffff8000881d7b20 [ 1626.862986] x23: ffff0000c2a981e8 x22: 1fffe00012410e7d x21: ffff0000920873e8 [ 1626.863701] x20: ffff0000920873e8 x19: ffff000086f22998 x18: 0000000000000000 [ 1626.864421] x17: 20747562202c3839 x16: 3932326636383030 x15: 3030666666662065 [ 1626.865092] x14: 6220646c756f6873 x13: 0000000000000001 x12: ffff60004fd9e4a3 [ 1626.865713] x11: 1fffe0004fd9e4a2 x10: ffff60004fd9e4a2 x9 : dfff800000000000 [ 1626.866320] x8 : 00009fffb0261b5e x7 : ffff00027ecf2513 x6 : 0000000000000001 [ 1626.866938] x5 : ffff00027ecf2510 x4 : ffff60004fd9e4a3 x3 : 0000000000000000 [ 1626.867553] x2 : 0000000000000000 x1 : ffff000096069640 x0 : 000000000000006d [ 1626.868167] Call trace: [ 1626.868382] __list_del_entry_valid_or_report+0x148/0x200 (P) [ 1626.868876] _free_cpntf_state_locked+0xd0/0x268 [nfsd] [ 1626.869368] nfs4_laundromat+0x6f8/0x1058 [nfsd] [ 1626.869813] laundromat_main+0x24/0x60 [nfsd] [ 1626.870231] process_one_work+0x584/0x1050 [ 1626.870595] worker_thread+0x4c4/0xc60 [ 1626.870893] kthread+0x2f8/0x398 [ 1626.871146] ret_from_fork+0x10/0x20 [ 1626.871422] Code: aa1303e1 aa1403e3 910e8000 97bc55d7 (d4210000) [ 1626.871892] SMP: stopping secondary CPUs Reported-by: rtm@csail.mit.edu Closes: https://lore.kernel.org/linux-nfs/d8f064c1-a26f-4eed-b4f0-1f7f608f415f@oracle.com/T/#t Fixes: 624322f ("NFSD add COPY_NOTIFY operation") Cc: stable@vger.kernel.org Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
sgaud-quic
pushed a commit
that referenced
this pull request
Mar 10, 2026
Syzkaller managed to find a combination of actions that was generating this warning: msk->pm.local_addr_used == 0 WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961 WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961 Modules linked in: CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b #22 PREEMPT(full) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline] RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline] RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210 Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a RSP: 0018:ffffc90001663880 EFLAGS: 00010293 RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640 R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650 FS: 00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0 Call Trace: <TASK> genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:742 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2592 ___sys_sendmsg+0x2de/0x320 net/socket.c:2646 __sys_sendmsg net/socket.c:2678 [inline] __do_sys_sendmsg net/socket.c:2683 [inline] __se_sys_sendmsg net/socket.c:2681 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f66346f826d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8 R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770 </TASK> The actions that caused that seem to be: - Set the MPTCP subflows limit to 0 - Create an MPTCP endpoint with both the 'signal' and 'subflow' flags - Create a new MPTCP connection from a different address: an ADD_ADDR linked to the MPTCP endpoint will be sent ('signal' flag), but no subflows is initiated ('subflow' flag) - Remove the MPTCP endpoint In this case, msk->pm.local_addr_used has been kept to 0 -- because no subflows have been created -- but the corresponding bit in msk->pm.id_avail_bitmap has been cleared when the ADD_ADDR has been sent. This later causes a splat when removing the MPTCP endpoint because msk->pm.local_addr_used has been kept to 0. Now, if an endpoint has both the signal and subflow flags, but it is not possible to create subflows because of the limits or the c-flag case, then the local endpoint counter is still incremented: the endpoint is used at the end. This avoids issues later when removing the endpoint and calling __mark_subflow_endp_available(), which expects msk->pm.local_addr_used to have been previously incremented if the endpoint was marked as used according to msk->pm.id_avail_bitmap. Note that signal_and_subflow variable is reset to false when the limits and the c-flag case allows subflows creation. Also, local_addr_used is only incremented for non ID0 subflows. Fixes: 85df533 ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set") Cc: stable@vger.kernel.org Closes: multipath-tcp/mptcp_net-next#613 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-4-4b5462b6f016@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.