X1C Camera support

[Nicoautoxp]

Hi,
I was wondering how i can add the X1C camera to Octoprint?
Regards,
Nic

[jneilliii]

Personally I use go2rtc to transcode the rtsp stream from the X1 into a supported format.

[jneilliii]

The go2rtc settings for it's config are like this.

streams:
  bambu_camera: rtspx://bblp:<access code>@<ip>:322/streaming/live/1

[Nicoautoxp]

@jneilliii did you installl go2rtc on the octoprint server?

[jneilliii]

I've done both actually run go2rtc in the pi and on my HA server.

For an OctoPi image flash these are my notes for install.

https://gist.github.com/jneilliii/93b412cb0bbf6b7bfd76f7e10d612f24

[CodeMasterCody3D]

If anyone needs something quick and easy. My addon to the repo adds camera support for the x1c and 1 click print solution for orcaslicer.

https://github.com/CodeMasterCody3D/OctoPrint-BambuPrinter/tree/rc

[skl111]

If anyone needs something quick and easy. My addon to the repo adds camera support for the x1c and 1 click print solution for orcaslicer.

https://github.com/CodeMasterCody3D/OctoPrint-BambuPrinter/tree/rc

How would I use this until the Octoprint Ecosystem is updated?